AIPO4 Supported Zinc Borohydride as a Novel Reagent for the Hydration of Aromatic Alkenes and Alkynes

Hydration of aromatic alkenes (styrene, α-methylstyrene and E-stilbene) and alkynes (phenyl and diphenylacetylene) has been achieved by the reaction of the corresponding alkenes or alkynes on zinc borohydride combined with AIPO₄ in DME. Except in the case of α-methylstyrene, Zn(BH₄)₂/AIPO₄ provides a more efficient and selective catalytic system than the combination with SiO₂ or Al₂O₃.     

Stereoselective Synthesis of Hydroxyethylene Dipeptide Isostere from Sugar

Regioselective opening of the aziridine ring in the carbohydrate-based precursor led to the stereoselective synthesis of N-Boc-O-benzyl-(4S,5S)-5-amino-4-hydroxy-6-phenylhexanoic acid methyl ester, the hydroxyethylene dipeptide isostere moiety of potent HIV-1 protease inhibitor.     

Facile Oxidation of Aldehydes to Carboxylic Acids with Chromium(V) Reagents

Recently we reported a convenient method of oxidation of alcohols to carbonyl compounds using chromium(V) reagents.¹ Although a variety of reagents are available for effecting this transformation, there are only a few reagents which have been successfully used for the oxidation of aldehydes to carboxyllc adds. Chromic acid, silver oxide and potassium permanganate are commonly employed for this purpose and reactions are performed in protic media under conditions which are not that mild.² The “non-aqueous” chromium(VI) reagent, pyridinium dichromate, recently reported by Corey³ oxidises alcohols and aldehydes to carboxylic acids in DMF at room temperature. Although Cr(V) species is postulated as an intermediate in all oxidations with Cr(VI), no systematic oxidation studies have been reported with these reagents. This note reports the results of some fruitful investigations on aldehyde → carboxylic acid conversion involving some “non-aqueous” chromium (V) complexes 1, 2, 3 and 5 under anhydrous conditions.     

JR 400–NaAOT interaction: a detailed thermodynamic study of polymer–surfactant interaction bearing opposite charges

The present study entails interaction between the cationic polymer N,N-dimethylhydroxyethyl cellulose (JR 400) and the double-tailed anionic surfactant Na-bis-2-ethyhexylsulphosuccinate (NaAOT). This oppositely charged polymer and surfactant are expected to cause coacervation and precipitation; hence, we have observed formation of thick solution similar to diluted gel at [JR 400]?~?0.01 and 0.10 %?w/v in aqueous solution. Viscometry, conductometry, tensiometry, and microcalorimetry techniques are used to monitor the interaction process. The results are explained in the light of both intrachain and interchain linking by way of NaAOT reverse micelle formation. Adsorption of NaAOT monomers onto the charged side chains of the polymer shields interchain electrostatic repulsion, leading to the formation of hydrophobic microdomains and microscopic heterogeneity in the solution. The morphologies of the domains depend on the level of addition of NaAOT in the system. The different stages of physiochemical changes that arise in solution have been identified by the use of different techniques, and correlations of the results have been attempted in terms of pragmatic models.     

Modeling and analysis of a marine plankton system with nutrient recycling and diffusion

This article describes a nutrient‐phytoplankton‐zooplankton system with nutrient recycling in the presence of toxicity. We have studied the dynamical behavior of the system with delayed nutrient recycling in the first part of the article. Uniform persistent of the system is examined. In the second part of the article, we have incorporated diffusion of the plankton population to the system and dynamical behavior of the system is analyzed with instantaneous nutrient recycling. The condition of the diffusion driven instability is obtained. The conditions for the occurrence of Hopf and Turing bifurcation critical line in a spatial domain are derived. Variation of the system with small periodicity of diffusive coefficient has been studied. Stability condition of the plankton system subject to the periodic diffusion coefficient of the zooplankton is derived. It is observed that nutrient‐phytoplankton‐zooplankton interactions are very complex and situation specific. Moreover, we have obtained different exciting results, ranging from stable situation to cyclic oscillatory behavior may occur under different favorable conditions, which may give some insights for predictive management. © 2014 Wiley Periodicals, Inc. Complexity 21: 229–241, 2015     

Radioanalytical separation and size-dependent ion exchange property of micelle-directed titanium phosphate nanocomposites

Nanocomposite titanium-phosphate (TiP) of different sizes was synthesized using Triton X-100 (polyethylene glycol-p-isooctylphenyl ether) surfactant. The materials were characterized by FTIR and powdered X-ray diffraction (XRD). The structural and morphological details of the material were obtained by scanning electron microscopy (SEM) and transmission electron microscopy. The SEM study was followed by energy dispersive spectroscopic analysis for elemental analysis of the sample. The important peaks of the XRD spectra were analyzed to determine the probable composition of the material. The average size distribution of the particles was determined by dynamic light scattering method. Ion exchange capacity was measured for different metal ions with sizes of the TiP nanocomposite and size-dependent ion exchange property of the material was investigated thoroughly. The nanomaterial of the smallest size of around 43 nm was employed to separate carrier-free ^137mBa from ¹³⁷Cs in column chromatographic technique using 1.0 M HNO₃ as eluting agent at pH 5.     

Evaluation of defect induced surface heterogeneity in Metal-Organic Framework materials with alkali dopants employing adsorption isotherm modelling

In this article, an assessment of surface structural heterogeneity in porous metal organic framework (MOF) structure has been demonstrated by employing the methane and carbon-dioxide adsorption isotherms data. The virgin MIL-101-(Cr) MOF was synthesized by the hydrothermal method and defects were induced in the MOF structure by doping with various alkali (K, Na, Li) cations. The synthesized MOFs were characterized by XRD, SEM, EDX and BET measurement techniques. In order to understand the defect induced surface heterogeneity by alkali cation dopants, the surface energy distributions for CH₄ and CO₂ adsorptions on MOFs were measured by Dubinin – Astakhov model equation. The surface heterogeneity is mainly controlled by the limiting uptakes of adsorbates, the polarizability of adsorbates and the adsorbate-adsorbent interaction energy.     

Sorptive elimination of fluoride from contaminated groundwater in a fixed bed column: A kinetic model validation based study

The current investigation involves a continuous adsorption experiment in a packed bed column for the sorptive elucidation of fluoride from contaminated groundwater using an activated soil-clay mixture. Through the combination of naturally accessible laterite soil with silica enriched clay (3:1 ratio), a low-cost Al–Si heterogeneous material has been developed. Following detailed characterization, the developed materials were employed in a long-time column process to achieve a high degree of fluoride separation from real-world groundwater. In a packed bed column investigation, the effect of bed height, initial fluoride concentration, and flow rate on the breakthrough properties of the adsorption system were investigated. By using a non-linear regression equation, three model kinetics, such as the Thomas Model, Adams-Bohart Model, and Yoon-Nelson Model, were fitted to validate the column-based experimental data, by analysing the breakthrough curves profiles, and distinct kinetic parameters. The Bed Depth Service Time Analysis (BDST) model was tested to express the effect of bed height on breakthrough curves, as well as to predict the time for breakthrough, and material depletion under optimal conditions. The Thomas and Yoon-Nelson models were identified to be the most appropriate ones for describing the entire breakthrough curve, whereas the Adams-Bohart model was only utilised to predict the first half of the dynamic process. With correlation coefficients (R²) 0.96, the experimental results were well suited to Thomas, Yoon-Nelson, and Adams-Bohart models. Finally, regeneration assessment was carried out where even after four cycles of operation, regenerated adsorbent showed a rejection efficacy of 78% to fluoride that proves the viability of the material and methodology.     

Planar Iron Hydride Nanoclusters: Combined Spectroscopic and Theoretical Insights into Structures and Building Principles

The controlled assembly of well-defined planar nanoclusters from molecular precursors is synthetically challenging and often plagued by the predominant formation of 3D-structures and nanoparticles. Herein, we report planar iron hydride nanoclusters from reactions of main group element hydrides with iron(II) bis(hexamethyldisilazide). The structures and properties of isolated Fe₄, Fe₆, and Fe₇ nanoplatelets and calculated intermediates enable an unprecedented insight into the underlying building principle and growth mechanism of iron clusters, metal monolayers, and nanoparticles.     

Isomer-Specific Vibrational Spectroscopy of Microhydrated Lithium Dichloride Anions: Spectral Fingerprint of Solvent-Shared Ion Pairs

The vibrational spectroscopy of lithium dichloride anions microhydrated with one to three water molecules, [LiCl₂(H₂O)_1–3]⁻, is studied in the OH stretching region (3800–2800 cm⁻¹) using isomer-specific IR/IR double-resonance population labelling experiments. The spectroscopic fingerprints of individual isomers can only be unambiguously assigned after anharmonic effects are considered, but then yield molecular level insight into the onset of salt dissolution in these gas phase model systems. Based on the extent of the observed frequency shifts Δν^OH of the hydrogen-bonded OH stretching oscillators solvent-shared ion pair motifs (<3200 cm⁻¹) can be distinguished from intact-core structures (>3200 cm⁻¹). The characteristic fingerprint of a water molecule trapped directly in-between two ions of opposite charge provides an alternative route to evaluate the extent of ion pairing in aqueous electrolyte solutions.